iFi Audio – Accessory – iSilencer3.0

$49.00

The iSilencer3.0® is an instant upgrade for all USB ports; it adds the following features to the USB ports:
1. Active Noise Cancellation® technology
2. Reduce jitter + packet errors
3. REbalance® the USB signal
4. USB3.0 technology for optimal transfer
The iSilencer3.0® is the most direct and simple upgrade for any USB port, it lowers noise/RFI/EMI by up to 40dB or 100x.It is ideal for the home and on-the-go improvement of all devices connected to the USB port, e.g. Computer Servers, Mixers, Hard drives etc. Regardless of the system; from US$10,000 to US$100, the iSilencer3.0® terminates noise, in its tracks.

Out of stock

Description

iSilencer3.0

[metaslider id=980]

Active Noise
Cancellation®

REbalance®
the USB signal

Reduced jitter
packet errors

USB3.0 technology

Eye Pattern_Ver.9

Eye Pattern_Ver.9

Eye Pattern_Ver.9

Eye Pattern_Ver.9

The iSilencer3.0® is an instant upgrade for all USB ports; it adds the following features to the USB ports:
1. Active Noise Cancellation® technology
2. Reduce jitter + packet errors
3. REbalance® the USB signal
4. USB3.0 technology for optimal transfer
The iSilencer3.0® is the most direct and simple upgrade for any USB port, it lowers noise/RFI/EMI by up to 40dB or 100x.It is ideal for the home and on-the-go improvement of all devices connected to the USB port, e.g. Computer Servers, Mixers, Hard drives etc. Regardless of the system; from US$10,000 to US$100, the iSilencer3.0® terminates noise, in its tracks.
iSilencer iSilencer iSilencer
Active Noise Cancellation® by AMR/iFi now rolling out across the range
iSilencer Active Noise Cancellation® by AMR/iFi is in-house technology developed to cut out noise in a very significant way in the audio field. It is now the bedrock of iFi signal/power products because…they need to address the issue of noise in both signal and power situations.What is the Active Noise Cancellation circuit design?

Drawing from the military field (specifically the Thales Spectra radar cancellation system deployed in the French Dassault Rafale jet fighter), iFi adapted this technology to exclusively introduce the Active Noise Cancellation® (ANC®) audio power system. It is now a cornerstone of the ever-improving iFi USB audio technology, looking for new products to feature ANC® ,and ANC+®.

iSilencer anc
An air defence radar is transmitting at a certain frequency; the signal is bouncing off the aircraft; a receiver on board the aircraft picks up the signal and a computer analyses its base frequency/modulations and an identical, out-of-phase signal is generated by an on board system to cancel out the enemy radar signal.By generating a signal identical to the noise signal but in the exact opposite phase, it actively cancels all the incoming noise. ANC® is the perfect ‘antidote’ for power supply noise, the bane of USB audio.
anc-m1
ANC® measured, noise drops by 100 times or 40dB in comparison to the Common Noise Filter. Sonically, the background and inner resolution to recordings is enhanced.
anc-m1
More than one iSilencer3.0® brings exponential benefit
iSilencer The iSilencer3.0® can be used not only at the active USB ports but also at unused USB ports where it will reduce radiated EMI and as the ANC® circuitry is bi-directional and usually as all USB ports share one power bus. The iSilencer3.0® cuts noise, system-wide for all USB ports, including for example an active port that has another iSilencer3.0® plugged-in which is the one connected to another device.
iSilencer
Multiple ANC® circuits will simply double the noise reduction each time the number of ANC® units is doubled. So 2 x iSilencer3.0® will kill double the noise of a single-one and four for example will kill four times the noise of a single one; if they are plugged into the same block of USB Ports and even though only one iSilencer3.0® has one device (e.g. DAC) connected into it.
USB3.0 technology, at the cutting-edge
iSilencer It is now a hallmark of all the latest iFi signal and power products to be USB3.0 standard. First USB3.0 is backwards compatible with USB2.0. Second, in terms of the specifications, USB3.0 is superior to USB2.0 e.g. the wire gauge specification is more exhaustive and the connections are better.Hence, the iSilencer3.0® is USB3.0 standard but also 2.0 compatible.
Specifications:
Supports USB3.0 and USB2.0 standard
Military-grade printed circuit board with audiophile components
Dimensions: 48 (l) x 18 (w) x 8 mm (h)
Weight: 6.3g (0.22oz)

User Manual

Reviews

There are no reviews yet.

Be the first to review “iFi Audio – Accessory – iSilencer3.0”

Your email address will not be published. Required fields are marked *

You may also like…