Singxer SU6 – USB Digital to Digital Converter – FREE shipping with code : SINGXER

PCM: 44.1KHz, 48KHz, 88.2KHz, 96KHz,

176.4KHz, 192KHz, 352.8KHz, 384KHz

[I2S out and WCLK out support all sampling rates, S/PDI and AES/EBU support 384K, and optical fiber support 192K]

DSD: 2.8 MHz (DSD64) – DoP, native

5.6 MHz (DSD128) – DoP, native

11.2 MHz (DSD256) – DoP, native

22.5 MHz (DSD512) – native

[I2S out supports all DSD formats, S/PDI and AES/EBU support DSD128 DOP mode, and optical fiber supports DOP64 at the highest level]

Bit width: up to 32 bit over I2S output

Maximum 24 bit over S/PDI, AES/EBU

1. The USB input socket is a standard USB-B base with a power supply range of 4.5V-5.1V.2.
2. DC POWER input socket uses DC2.1 socket to support 7.5V-9V DC input (in order to realize the fast charging of supercapacitor, the power supply requirement is 3A).
3. The BNC interface and RCA interface output standard S/PDI signal with a level of 550 mV (connected to standard load) and an output impedance of 75 ohms. 24/384k and dsd128 over dop support (Dac must also support this, otherwise most dacs can accept 24/192 and dsd64 over dop)
4. The XLR interface outputs standard AES/EBU signals with a level of 3.3V (connected to standard load) and an output impedance of 110 ohms. 24/384k and dsd128 over dop support (Dac must also support this, otherwise most dacs can accept 24/192 and dsd64 over dop)
5. Word Clock (WCLK) output uses BNC interface, TTL (no load), output impedance is 75 ohms;
6. Six and two HDMI-I2S signals are output through HDMI socket. The four output signals include MCLK, BCLK, LRCLK and SDATA signals. The standard differential level of LVDS is adopted and the impedance is controlled at 100 ohms. The PIN13-15 of HDMI socket is DSD_ON signal, the high level is I2S working in DSD mode, the level is LVTTL; the PIN18 is 5V weak power output (output current is less than 20ma), which can be used as interface plug-in indication; the I2S sequence of two output lines is the same.
7. RJ45-I2S output I2S signal is CMOS (5V) single-ended signal, low resistance output, output four signals including MCLK, BCLK, LRCLK, SDATA signal.
8. Fiber optic ports output standard optical signals. 24/192k support and dsd64 over dop

• Windows 7, Windows 8, Windows 10; 32/64 bit, need to install dedicated drivers
• Native MacOS 10.6 and later, using system self-drive
• Native Linux with UAC2 compliant kernel, using system-driven (tested on Ubuntu and Daphile systems, based on INTEL X86 platform)
• Android OS 4.2 and above, need equipment to support OTG function, generally speaking, Android 5.0 system is supported by default, the recommendation below 5.0 is used with special players.

The length, width and height of the chassis: 238MM*170MM*46MM, excluding the height of the foot and the prominent part of the rear connector of the chassis.

Single machine weight: 1.6KG.

The length, width and height of carton packing are 350MM 230MM 110MM.

Packing Weight: 2.0KG

A USB cable, a power adapter (universal, AC100V-240V) and a power cord

Current Driver: V5.12.00